 |
|
|
|
|
| |
 |
|
| |
|
|
|
|
|
| PROMETHEAN ACTIVboard INFORMATION SESSIONS |
|
|
| |
INTERACTIVE WHITEBOARDS -
FREE INFORMATION & DEMONSTRATION SESSIONS FOR TEACHERS. Featuring: THE PROMETHEAN ACTIVBOARD
Come and try this new teaching technology for yourself, and see how it could revolutionise the classroom.
...more
|
| |
|
|
Real Backup & Support
– Lifetime onsite support is provided at no charge (metro
area).
Phone & Onsite Support – should you require
a question answered or if you are having difficulty with any hardware
provided we are only a phone call away.
Local Repairs – With our own technician &
every brand we sell having a local (WA) repair agent, you can be assured
of a speedy return of your projector.
17 Years of Experience & Expert Advice –
With 16 years experience in the Projector market we can direct you towards
the right equipment for your application.
Connecting the projector to a PC/Laptop
| |
|
|
| Step 1.
Plug the power in and switch on at projector |
Step 2.
Insert Monitor Cable into RGB 1 |
Step 3.
Insert other end of Monitor Cable into PC/laptop |
| |
|
|
| Step 4.
Press button once wait 20 seconds until full brightness |
Step 5.
Push button to Adjust height of Image |
Step 6.
Screw back leg for level adjustment |
| |
| Caution
|
| To Power
off – Press power button twice. Always allow the projector
to cool by waiting until the fan has stopped and the LED lights
have become stationary. |
|
| Caution |
| This air filter should
be free of dust. If the filter is blocked the projector cannot
“breathe”, causing a build up of heat and the
result is irreparable damage. This is the only regular maintenance
and needs to be checked as often as the operating environment
requires. To maintain, unclip the air filter here and clean |
|
| Step 7.
No image on laptop or projector Screen? Hold down Fn Key &
F5 to toggle (Wait~5 seconds before pressing again) |
Troubleshooting Guide
- Remote doesn’t work - A. ensure to point
the remote either at the projector or the screen. B. Check the batteries
still have sufficient power.
- Image on Projector screen but not Laptop screen
- See step 7
- Image upside down or back to front - the projector
has been set for ceiling or rear projection. Push the Right hand arrow
on the menu circle on the top of the projector. Move yellow highlight
to options menu. Arrow down to mirror then arrow across so the indicator
is pointing to normal. The orientation of the image will now right
itself. Menu will disappear.
- Image wrong colour (VERY Blue, Red or Green)
- Check the computer cable and that all the pins are straight and
not broken. Each pin and cable between them has its own colour if
one of these does not make connection the result is an image without
that component of colour. Solution - the cable must be replaced. (Note
if one pin in the middle is missing, that’s normal.)
- Image Blurred - turn the lens at the front like
a camera, this should sharpen the image.
|
|